Posts: 1,303
	Threads: 199
	Joined: Sep 2014
	
Reputation: 
20
	 
	
	
		My trim tilt has started leaking on my Yamaha F150 outboard. There are a number of kits out there that includes all of the seals to rebuild the 3 cylinders on the trim tilt unit with the tool to remove the cylinder caps for around $80. Just wondering if any of you folks have done the rebuild and might have a few tips or what would it cost to have a shop do it?
	
	
	
	
	
 
 
	
	
	
		
	Posts: 1,445
	Threads: 159
	Joined: Jan 2009
	
Reputation: 
9
	 
	
	
		About 2yrs ago I had to replace the plunger seals on my F150 as one starting leaking. Its not a hard job but its also best to get it fixed asap since that unit is submerged. The pump & motor assy still works fine. The best thing to do is stay with the correct Yamaha specific spanner tool for removal of caps. 
	
	
	
![[Image: P3100003.jpg]](https://i.ibb.co/QnZ1nks/P3100003.jpg) Harrisville UT
Harrisville UT
2000 7.3L F250 Superduty  '07 Columbia 2018 Fisherman XL Raymarine Element 9HV 4 Electric Walker Downriggers Uniden Solara VHF