Posts: 178
Threads: 0
Joined: May 2009
Reputation:
0
See if this helps any. I didn't really look through it
[url "http://www.trollingmotorparts.com/Default.aspx?AspxAutoDetectCookieSupport=1"]http://www.trollingmotorparts.com/Default.aspx?AspxAutoDetectCookieSupport=1[/url]
[signature]
Posts: 15,634
Threads: 1,329
Joined: Feb 2002
Reputation:
16
Here you go:
[url "http://www.bigfishtackle.com/cgi-bin/gforum/gforum.cgi?post=270226;search_string=Minn%20Kota;#270226"]Click here:[/url]
[signature]
Posts: 70
Threads: 0
Joined: Dec 2008
Reputation:
0
Ok thanks i will call them in the morning
[signature]
Posts: 686
Threads: 0
Joined: Aug 2002
Reputation:
0
Why are the bearings bad? You don't see that too often. What I have seen is water get inside and freeze up the shaft. I had to tear one apart a few years back and dry it out. Then reseal the bottom end. It still works to this day. Has it been bad for a while or did it just start acting up when the weather got cold?
[signature]
Posts: 11,107
Threads: 3
Joined: Mar 2006
Reputation:
0
One thing Crofts Power Equipment has moved about one block east. They are now on the corner of 500 west and 1500 South. Looks like a larger building then what they were in before.
[signature]
Posts: 70
Threads: 0
Joined: Dec 2008
Reputation:
0
I dont know why they went bad. The upper ones are just fine but the lower ones are all rusted out and in two pieces. i dont know that much about it but i got it all tore apart and think i can get it back in business if i can get the bearings. I will make a few phone calls tomorrow and get some coming. If all goes well I will be on the gorge soon[cool]
[signature]
Posts: 593
Threads: 0
Joined: Feb 2007
Reputation:
0
i think the bearings are still good ! take them out and re surfuce them, i can help you out with that if you can bring them my way (SANDY) just let me know.
[signature]